Afterpay 4 fortnightly payments from $120.00learn more »

Raceworks 2.8L Surge Tank Combo Special

Choose either single or twin fuel pumps 

Raceworks Passion For Performance LogoTI Automotive LogoWalbro Logo


In Stock

Raceworks 2.8L Surge Tank Combo Special

Select from a range of pump combinations with the Raceworks 2.8L Surge tank combo special!

Raceworks 2.8L Surge Tank Suits Single or Twin Pumps

Can be configured with either a single or twin 39mm-40mm Intank Pumps

When reliable fuel delivery is your number one priority on the track and strip, a quality surge tank is your first line of defence against sustained lateral loads.

Raceworks Surge Tanks have been crafted to meet the most extreme street and track conditions, and are perfectly robot welded from 5052 aluminium. They are presented with a tough, high polished finish or polished black anodised coating, and all inlet and outlet AN fittings are precision machined and tested for leak-free installation.

Dual Stainless Electrical Terminals with Teflon Seals, allowing the pumps to be staged
AN-8 O-Ring Ports
Anodised in Black, providing Corrosion Resistance when used with E85
Viton O-rings supplied with Teflon Intank Hose
2.8L Capacity When Used With a Single Pump
2.6L Capacity When Used With Twin Pumps
Supports AN Hose Ends Up To 150Deg

Height: 225mm

Width: 195mm

Surge Tanks are designed for off-road use only, damage caused from incorrect installation is not covered under warranty.

Walbro 255LPH In-tank Fuel Pump High Pressure GSS342

The Walbro high output in-tank electric fuel pumps are available in flow ratings of 255 liters of fuel per hour. These particular pumps flow significantly more fuel at higher pressure than standard-pressure versions. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour.

Walbro Part Number: GSS342
Type: Universal Intank Fuel Pump
Fuel: Pump unleaded
Horsepower: 500HP+ (N/A & pump fuel)
Flow Rate: 255LPH

Walbro 460LPH Fuel Pump In Tank E85 Compatible

Designed for engines with up to 750hp
Award Winning OE Technology
High Pressure, High flow performance
OEM technology designed and developed for E85.
All pumping components have been validated to OEM specification for approved use in E85/Flex fuel application

Fittings In (mm): 11
Fittings Out (mm): 9
Voltage DC: 12
Flow Ltr/Hr (Max): 516
Flow Ltr/Hr @ 3 Bar (44psi): 420
Flow Ltr/Hr @ 5 Bar (73psi): 390
Max Pressure (Bar): 8.3
Length 130mm
Diameter 50 / 39mm

Walbro 525LPH Fuel Pump In Tank E85 Compatible

One of the highest flowing in tank fuel pumps on the market

Fuel: GAS & E85
Horsepower: 900+ at 60PSI, naturally aspirated applications
Over All Pump Length: 131mm
Main Housing Diameter: 39mm
Lower Housing Diameter: 50mm
Fuel Inlet Diameter: 11mm OD
Fuel Outlet Diameter: 11mm OD
Flow Rate: 470lph @ 40psi (120+ gph)
Test Voltage: 13.5 Volts

*Not for road use

You may also like…